Revert "Reduce SPI clock and add panel stabilization delays"
This reverts commit 2205e56c32.
This commit is contained in:
17
main/main.c
17
main/main.c
@@ -80,7 +80,7 @@ static const char *TAG = "LVGL_AMOLED";
|
||||
#define PIN_NUM_TOUCH_RST (-1)
|
||||
#define PIN_NUM_TOUCH_INT (GPIO_NUM_21)
|
||||
|
||||
#define ENABLE_BACKLIGHT 0
|
||||
#define USE_TOUCH 1
|
||||
|
||||
/* IO Expander Pins */
|
||||
#define IO_EXPANDER_PIN_NUM_0 (1 << 0)
|
||||
@@ -485,9 +485,8 @@ void app_main(void) {
|
||||
|
||||
esp_lcd_panel_io_spi_config_t io_config = SH8601_PANEL_IO_QSPI_CONFIG(
|
||||
PIN_NUM_LCD_CS, notify_lvgl_flush_ready, &disp_drv);
|
||||
// Reduce SPI clock to 5MHz to lower power consumption and avoid brownout
|
||||
io_config.pclk_hz =
|
||||
5 * 1000 * 1000; /* 5MHz for stability */
|
||||
40 * 1000 * 1000; /* Reduced to 40MHz for stability (matching demo) */
|
||||
|
||||
ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)LCD_HOST,
|
||||
&io_config, &lcd_io));
|
||||
@@ -508,23 +507,11 @@ void app_main(void) {
|
||||
ESP_ERROR_CHECK(esp_lcd_new_panel_sh8601(lcd_io, &panel_config, &lcd_panel));
|
||||
ESP_LOGI(TAG, "Resetting panel");
|
||||
ESP_ERROR_CHECK(esp_lcd_panel_reset(lcd_panel));
|
||||
// Small delay to allow the panel to stabilize after reset
|
||||
vTaskDelay(pdMS_TO_TICKS(100));
|
||||
ESP_LOGI(TAG, "Initializing panel");
|
||||
ESP_ERROR_CHECK(esp_lcd_panel_init(lcd_panel));
|
||||
// Additional delay before turning the panel on
|
||||
vTaskDelay(pdMS_TO_TICKS(200));
|
||||
ESP_LOGI(TAG, "Turning panel ON");
|
||||
ESP_ERROR_CHECK(esp_lcd_panel_disp_on_off(lcd_panel, true));
|
||||
ESP_LOGI(TAG, "Panel init complete");
|
||||
#if ENABLE_BACKLIGHT
|
||||
// Turn off backlight initially via IO expander to reduce power draw
|
||||
esp_io_expander_set_level(io_expander, IO_EXPANDER_PIN_NUM_2, 0);
|
||||
// Short delay to ensure panel is stable
|
||||
vTaskDelay(pdMS_TO_TICKS(100));
|
||||
// Enable backlight after panel is on
|
||||
esp_io_expander_set_level(io_expander, IO_EXPANDER_PIN_NUM_2, 1);
|
||||
#endif
|
||||
|
||||
/* Touch Driver Setup (FT5x06) */
|
||||
#if USE_TOUCH
|
||||
|
||||
Reference in New Issue
Block a user