update: Added button at GPIO 0 for testing.
This commit is contained in:
33
main/main.c
33
main/main.c
@@ -17,6 +17,8 @@
|
||||
#include "lv_conf.h"
|
||||
#include "lv_demos.h"
|
||||
#include "esp_lcd_touch_cst816s.h"
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/task.h"
|
||||
/* LCD size */
|
||||
#define EXAMPLE_LCD_H_RES (240)
|
||||
#define EXAMPLE_LCD_V_RES (280)
|
||||
@@ -44,6 +46,9 @@
|
||||
|
||||
#define TOUCH_HOST I2C_NUM_0
|
||||
|
||||
/* Power button */
|
||||
#define PWR_BUTTON_GPIO (GPIO_NUM_0)
|
||||
|
||||
#if EXAMPLE_USE_TOUCH
|
||||
#define EXAMPLE_PIN_NUM_TOUCH_SCL (GPIO_NUM_10)
|
||||
#define EXAMPLE_PIN_NUM_TOUCH_SDA (GPIO_NUM_11)
|
||||
@@ -225,8 +230,36 @@ static void app_main_display(void)
|
||||
lvgl_port_unlock();
|
||||
}
|
||||
|
||||
static void wait_for_power_button(void)
|
||||
{
|
||||
/* Configure power button GPIO */
|
||||
gpio_config_t pwr_btn_config = {
|
||||
.mode = GPIO_MODE_INPUT,
|
||||
.pin_bit_mask = 1ULL << PWR_BUTTON_GPIO,
|
||||
.pull_up_en = GPIO_PULLUP_ENABLE,
|
||||
.pull_down_en = GPIO_PULLDOWN_DISABLE,
|
||||
.intr_type = GPIO_INTR_DISABLE,
|
||||
};
|
||||
ESP_ERROR_CHECK(gpio_config(&pwr_btn_config));
|
||||
|
||||
ESP_LOGI(TAG, "Waiting for power button press on GPIO %d...", PWR_BUTTON_GPIO);
|
||||
|
||||
/* Wait for button press (active low) */
|
||||
while (gpio_get_level(PWR_BUTTON_GPIO) == 1) {
|
||||
vTaskDelay(pdMS_TO_TICKS(10));
|
||||
}
|
||||
|
||||
/* Debounce delay */
|
||||
vTaskDelay(pdMS_TO_TICKS(50));
|
||||
|
||||
ESP_LOGI(TAG, "Power button pressed, starting system...");
|
||||
}
|
||||
|
||||
void app_main(void)
|
||||
{
|
||||
/* Wait for power button press before starting */
|
||||
wait_for_power_button();
|
||||
|
||||
/* LCD HW initialization */
|
||||
ESP_ERROR_CHECK(app_lcd_init());
|
||||
|
||||
|
||||
Reference in New Issue
Block a user