Add initial project files for ESP32 animated eyes, including main application sources, assets, CMake configuration, and supporting ESP-IDF components for LCD and touch functionality. Includes documentation, test apps, and configuration files.
2.2 KiB
2.2 KiB
ESP LCD Touch FT5x06 Controller
Implementation of the FT5x06 touch controller with esp_lcd_touch component.
| Touch controller | Communication interface | Component name | Link to datasheet |
|---|---|---|---|
| FT5x06 | I2C (SPI 1 ) | esp_lcd_touch_ft5x06 |
Add to project
Packages from this repository are uploaded to Espressif's component service.
You can add them to your project via idf.py add-dependancy, e.g.
idf.py add-dependency esp_lcd_touch_ft5x06==1.0.0
Alternatively, you can create idf_component.yml. More is in Espressif's documentation.
Example use
I2C initialization of the touch component.
esp_lcd_panel_io_i2c_config_t io_config = ESP_LCD_TOUCH_IO_I2C_FT5x06_CONFIG();
esp_lcd_touch_config_t tp_cfg = {
.x_max = CONFIG_LCD_HRES,
.y_max = CONFIG_LCD_VRES,
.rst_gpio_num = -1,
.int_gpio_num = -1,
.levels = {
.reset = 0,
.interrupt = 0,
},
.flags = {
.swap_xy = 0,
.mirror_x = 0,
.mirror_y = 0,
},
};
esp_lcd_touch_handle_t tp;
esp_lcd_touch_new_i2c_ft5x06(io_handle, &tp_cfg, &tp);
Read data from the touch controller and store it in RAM memory. It should be called regularly in poll.
esp_lcd_touch_read_data(tp);
Get one X and Y coordinates with strength of touch.
uint16_t touch_x[1];
uint16_t touch_y[1];
uint16_t touch_strength[1];
uint8_t touch_cnt = 0;
bool touchpad_pressed = esp_lcd_touch_get_coordinates(tp, touch_x, touch_y, touch_strength, &touch_cnt, 1);
-
NOTE: This controller should work via I2C or SPI communication interface. But it was tested on HW only via I2C communication interface. ↩︎